Choosing the right sink plug size can sometimes feel like solving a puzzle. Whether you're replacing an old plug or selecting one for a new sink, several factors come into play to ensure a perfect fit. From understanding the measurements to considering the type of sink and drain, finding the correct size involves attention to detail. By exploring these aspects, you can confidently select a sink plug that not only fits snugly but also functions seamlessly with your sink setup.

Not sure which size you need? 

Use this template downloadable to determine the size of your sink plug. 

1. Print this template on A4 size paper (download on bottom of page).
2. Place your old sink plug with the convex side up on the paper. 
3. Position the sink plug in the square. 
4. Ensure the sink plug touches the blue square on the left and bottom sides of the blue square. Make sure the sink plug aligns with the bumps at the level of the two bumps on the paper. 
5. The sink plug will touch one of the 3 squares on the right side. Based on the color of the line that is touched, determine the correct size of the sink plug. 
6. Still unsure about which size sink plug you need? Feel free to contact us at support@minismus.eu. 

This document is 210 mm x 297 mm (DIN A4 format). Be sure to print ‘Actual Scale’ and NOT ‘fit to page’ or ‘scale’. No Margins. Not sure if the template has been printed to the correct scale? Then measure the squares with a ruler.

I do not have the original sink plug!? 
No worries, follow our instructions below

1.  Measure Diameter of drain.
   
   Important It is important to measure right in the middle. If you don't do this, you risk measuring a diameter that's too small. Place the measuring tape precisely over the center hole of the drain to measure accurately.

   Tip: Use a calliper for most accurate measurement

2. Subtract 2mm from measurement
   

   This is needed to ensure there is a small amount of space between the sink plug and the drain so it does not jam.

Click here to download the size template